Get ready with a personal computer that can read a CD-ROM, and connect the personal computer to the RM-ALGEBRA FX 2.0 with the FA123 cable.			Turn the power off and replace the battery with a new one.
	Insert the relevant end of the FA123 cable into the COM terminal of the personal computer and the other end into the terminal at the lower part of the RM-ALGEBRA FX 2.0.			Turn the power on, select the LINK icon on the main menu, and press F2 [Recv].
	Turn on the power of the personal computer and start Windows. Terminate all the applications running on the personal computer.
	Double-click [OHP-Inst.exe]. Read through License Agreement and select [I accept].
	Select*2 a file that begins with the name of the model you want to install, and double-click it.
	*2....To install the data of the ALGEBRA FX 2.0 PLUS Version 1.032 model, select the "RM-ALGEBRA FX 2.0 PLUS Ver 1.032.bi_" file.
	The procedure required to the RM-ALGEBRA FX 2.0 side is displayed on the screen of the personal computer as follows.
	"Turn on the remote control unit, enter the LINK mode, and then press [F2] Recv."
Proceed to the following procedures after the RM-ALGEBRA FX 2.0 gets ready for receiving.
	Press [OK] on the screen when the RM-ALGEBRA FX 2.0 gets ready.
	The procedure required to the RM-ALGEBRA FX 2.0 side is displayed on the screen of the personal computer.			Press [MENU], select the UPDATE02 icon on the main menu, and press [EXE]. The RM-ALGEBRA FX 2.0 enters the model data read mode.
	On the main menu, select the "Update02" icon and then press [EXE] key.
Proceed further after "UPDATE02" is carried out in the RM-ALGEBRA FX 2.0.
	When the RM-ALGEBRA FX 2.0 gets ready for receiving, press [OK] on the screen. The communication stars again.
If the message "Complete!" appears on the screen of the RM-ALGEBRA FX 2.0, press [MENU]. The transmission is completed.
* Do not disconnect the cable during read.
* If no key operation is performed for 6 minutes while getting ready for replacement, the power of the RM-ALGEBRA FX 2.0 is turned off. Be careful to avoid the abortion of the operation of the RM-ALGEBRA FX 2.0 side.

If the message informing you of the insufficiency of power appears during replacement of the model data, start the procedure of replacement from scratch after performing the following procedures. The model data of the RM-ALGEBRA FX 2.0 is deleted on the half way. The device does not function properly if the replacement is aborted on the half way. Be sure to start the procedure of replacement from scratch.
	Press [ESC]. The power is turned off.
	Replace the battery with a new one.
	Press the P button softly, which is located on the rear side of the RM-ALGEBRA FX 2.0, with such as a thin tip-pointed stick to reset.
A)	After the battery is replaced, if the message "DATA ERROR!" appears.
	Press [EXE] according to the directions displayed on the screen and perform the reset operation. Select the LINK icon on the main menu and press the F2 [Recv]. Start again from step 5.
B)	After the battery is replaced, if the message "Software Version Up Receiving..." appears
	Because the model data is deleted when the replacement is initiated, no other screen is displayed. Start again from step 5. Steps 7 through 13 are abbreviated automatically in operation.

All Rights Reserved, Copyright(C) CASIO COMPUTER CO., LTD. 1997-2001.