 |
|
 |
Problems and Countermeasures when using a SanDisk 256MB/128MB SD card or SanDisk 32MB MultiMedia Card
|
 |
|
|
| · |
Using
a SanDisk 256MB/128MB SD Card |
|
A
SanDisk 256MB/128MB SD card may not be recognized
by the camera and the error message "Memory
Full" may appear even after the card is formatted
by the camera. In some cases, data transfer
over a USB connection may not be possible
while a SanDisk 256MB/128MB SD card is loaded
in the camera. Should you experience any of
the above, visit the CASIO download Website,
download the EX-S1 or EX-M1 firmware update,
and update the firmware of your camera. |
|
|
|
|
|
| · |
Using a SanDisk 32MB MultiMedia Card |
|
Data transfer over a USB connection may not be possible while a SanDisk 32MB MultiMedia card
is loaded in the camera. Should you experience this problem, visit the CASIO download Website,
download the EX-S1 or EX-M1 firmware update, and update the firmware of your camera. |
|
|
|
|
|
EXILIM
EX-S1/EX-M1 Firmware Update |
|
| Checking Your Current Firmware Version |
|
On
your EX-S1 or EX-M1 camera, hold down the [MENU]
button as you press the [POWER ON/OFF] switch to
turn on the camera. Keep [MENU] depressed until
the version of your camera's firmware appears on
the monitor screen.
If "Ver.1.00" appears, you need to download the
EX-S1 or EX-M1 firmware update and install it
on your camera.
If "Ver.1.01" appears, it means that your camera
already is running the latest firmware version,
so you do not need to install the firmware update.
|
|
| < EXILIM EX-S1/EX-M1 Firmware Update > |
|
|
| - |
Fixes a problem that made it impossible to recognize a SanDisk 256MB/128MB SD card. |
| - |
Fixes a problem that made it impossible to perform a USB data transfer operation while
a SanDisk 32MB MultiMedia card is loaded. |
| - |
Improves flash intensity precision. |
| - |
Fixes a problem that caused loss of connection during USB data communication. |
| - |
Other improvements. |
|
 |
