 |
|
 |
Functions Added by Firmware Update
|
 |
|
| Updating the EX-S1/EX-M1 firmware to Version 1.10 or greater adds certain functions to your camera. Note that the User's Guide that comes with the camera does not cover these functions. |
|
 |
|
 |
To check your firmware version
|
|
| On your EX-S1 or EX-M1 camera, hold down the [MENU] button as you press the [POWER ON/OFF] switch to turn on the camera. Keep [MENU] depressed until the version of your camera's firmware appears on the monitor screen. |
|
| • |
If "Ver.1.00-1.01" appears, you need to download this update software and install it on your camera.
|
| • |
If "Ver.1.10" appears, it means that your camera already is running the latest firmware version, so you do not need to install this update.
|
|
|
|
|
Functions added by firmware update |
|
|
| · |
Turning Image Review On and Off |
|
Image review displays an image on the monitor screen as soon as you record it.
Use the following procedure to turn image review on and off.
|
|
1.
|
In
the REC mode, press MENU. |
|
2.
|
Select
the "REC"tab, select "Review", and then rock
the controller to the right. |
|
3.
|
Rock
the controller up or down to select the setting
you want, and then click. |
|
| To
do this |
Select
this setting |
| Display
images on the monitor screen immediately
after they are recorded |
On |
| Do
not display images immediately
after they are recorded |
Off |
|
|
|
Note:
The initial default setting is "Off". |
 |
|
|
|
|
|
|
|
| · |
Ability to turn off Controller Function Assignment |
|
Under its current configuration, you can assign one of four functions (REC Mode, EV shift, Flash Mode, White Balance Mode) to the controller rock left or rock right operations. After installing this update, you have the option of turning off the controller function assignment. |
|
1.
|
In the REC mode, press MENU. |
|
2.
|
Select the "REC" tab, select "L/R Key", and then rock the controller to
the right. |
|
3.
|
Rock the controller up or down to select "Off", and then click. |
|
|
· When
"Off" is selected, the controller does not
perform any of the four assignable functions. |
|
|
|
|
|
| · |
Monitor Screen On/Off Setting Memory |
|
When you turn off the camera, it remembers whether you have the monitor
screen turned on or off. The monitor screen on/off setting is restored the next time you turn on power. |
|
|
|
|
|
|
